AMX high voltage amplifier

1. Output voltage: 0 to ±30 kV DC or peak AC

2. Output current: 0 to ±20 mA DC or peak AC

3. Conversion rate: greater than 550 V / μs

4. Large signal bandwidth: DC to greater than 2.5kHz (-3dB)

5. DC voltage gain: 3000 V / V

6. OEM customization

7.0-30 kV settling time (to 1%) is less than 200 μs

8. Dynamic adjustment to optimize AC response for various load parameters

9. Local and remote high voltage on/off function, short circuit protection

10. Low output noise, closed loop system to ensure high accuracy

11. Utilize complete solid-state design and maintenance-free design

12. Prevent over-voltage and over-current conditions generated by active loads

13. Drive capacitive load through four-quadrant output

INTRODUCTION

Wisman’s high voltage amplifier AMX30R600, output voltage ±30kV, output current 20mA, type is a high voltage power amplifier, used in industrial and research applications. All solid-state high voltage insulation design can achieve high conversion rate, wide bandwidth and low noise operation. The four-quadrant active output sinks or outputs current to reactive or resistive loads within the entire output voltage range. This type of output is essential for achieving accurate output response and the high slew rate required for various loads, such as high capacitive or reactive loads. The amplifier is a non-inverting amplifier.

FEATURES AND ADVANCE

Four-quadrant output for driving capacitive loads

Closed loop system achieves high accuracy

Short circuit protection for equipment protection

All solid-state design, maintenance-free operation

DC stable programmable power supply application

Low output noise, providing ultra-precise output

APPLICATIONS:

Electrostatic deflection, electrophoresis, electrorheological fluid, electro-optical modulation, material polarization, AC or DC bias, ion beam steering, particle accelerator, mass spectrometer, material characterization, ferroelectric, atmospheric plasma, dielectric barrier discharge.